NetDirector 16-Port 1U Rack-Mount Console KVM Switch with 17-in. LCD and IP Remote Access

Tripp Lite’s B020-016-17-IP KVM Switch gives you a rack-mountable keyboard, LCD and touchpad in a single console that occupies only 1U of rack space. From across the room, down the street or halfway around the globe, the B020-016-17-IP can be accessed from any computer on the LAN, WAN or Internet. Easy to install and use, it’s the optimal solution for controlling up to 16 computers/servers.

The B020-016-17-IP has a built-in 17” LCD screen that supports video resolutions up to 1280 x 1024 and remote monitor resolutions up to 1600 x 1200. You can switch easily between the 16 ports using on-console push buttons, an on-screen display (OSD) or keyboard hot key commands. Up to 64 users can be authorized and 32 remote users can be logged on concurrently when multi-user operation is enabled, with multi-level password security. RADIUS server authentication is supported.

This switch controls PS/2 or USB computers/servers using a P774-Series (PS/2) or P776-Series (USB) KVM Cable Kit (one of each is included). When not in use, the B020-016-17-IP stores neatly in a rack drawer and pulls out when needed. With its dual-rail design, you can slide the keyboard into the rack, while the monitor stays visible. This KVM console is compatible with all major operating systems. Heavy-duty steel housing stands up to frequent use.

Saves Space and Money

● Combines 16-port KVM switch, 17"" LCD screen, keyboard and touchpad in a 1U rack-mountable drawer – ideal when rack space is at a premium
● Mounts into 19”-wide rack, 26.5”-30” deep
● Flip-up/fold-down screen keeps the console from blocking access to rack equipment when not in use; dual-rail design lets you push in the keyboard while the LCD stays open

IP Remote Access for Fewer Trips to the Server Room

● Remote access offers convenience of controlling servers from anywhere…no need to travel to the server room or network closet
● Supports both IPv4 and IPv6 and network interfaces TCP/IP, HTTP, HTTPS, UDP, RADIUS, DHCP, SSL, ARP, DNS, 10Base-T/100Base-TX, Auto Sense and Ping

Simplifies IT Tasks

● Switch easily between the 16 ports via on-console buttons, on-screen display or hot keys
● Panel array mode lets you monitor multiple ports at the same time
● Hot pluggable; add or remove computers without powering down the switch
● Auto-scan mode automatically sequences through all active ports accessible to the user
● Windows-based log server tracks events on your installation

Large 17” LCD

● Wide display makes multitasking easier
● Supports video resolutions up to 1280 x 1024; remote monitor resolutions up to 1600 x 1200
● DDC emulation allows settings of each computer to be automatically adjusted for optimal output to LCD

Advanced Security Features

● Includes password protection and advanced encryption: 1024-bit RSA, 256-bit AES, 56-bit DES, and 128-bit SSL
● Supports RADIUS server authentication
● Allows up to 64 user accounts; with multi-user operation enabled, up to 32 users can log on at one time

Expandability and Long-Lasting Reliability

● Compatible with all major operating systems for easy integration into your existing structure
● Flash firmware is upgradable over a network connection
● Heavy-duty steel housing stands up to frequent use

● Control computers/servers locally or via LAN, WAN or Internet
● Occupies just 1U of space in a rack-mountable, dual-rail drawer
● 17” LCD screen supports video resolutions up to 1280 x 1024
● Allows up to 64 authorized users and 32 concurrent remote log-ins
● Compatible with all operating systems

System Requirements

● PS/2 or USB computer with VGA, SVGA or MultiSync video graphics card with HD15 port
● (1) P774-Series (PS/2) or P776-Series (USB) KVM Cable Kit is required for each connected computer/server
● Computers that access the KVM remotely should have at least a Pentium III, 1GHz processor, with screen resolution set to 1024 x 768
● If remote computer is accessing the switch with Windows Client, DirectX 7.0 or higher is needed; if accessing the switch with Java Client, Sun’s Java 2 (1.4.2 or higher) runtime environment must be installed
● Browsers must support 128-bit encryption
● A network transfer speed of 128 Kbps or higher is recommended
● Compatible with all major operating systems
● Power consumption: 120V, 60Hz, 31W; 230V, 50Hz, 39W

Package Includes

● B020-016-17-IP 16-Port Console KVM Switch with 17"" LCD and built-in IP access
● P774-Series 1.83 m PS/2 KVM Cable Kit
● P776-Series 1.83 m USB KVM Cable Kit
● C13 to 5-15P power cord
● Owner’s Manual CD

Batteries not Required to Operate

Tripp Lite NetDirector 16-Port 1U Rack-Mount Console KVM Switch with 17-in. LCD and IP Remote Access, 43.2 cm (17"), -20 - 60 °C, 0 - 40 °C, 482.6 x 706.1 x 44.4 mm, 17.3 kg, 16 x HD15 F 1 x RJ-45 F 3 x MiniDIN6 F